Vision Polish

Description

Vision H-Gloss Polish is a metal cross-linked floor polish. It gives durability, superior wet look gloss finish and is easy to use. It flows evenly and levels quickly to dry to a  lustrous gloss. Subsequent coats apply smoothly without drag, pulling, streaking or clouding. It resists surface scuffs, black heel marks, and soil penetration, allowing extended periods between maintenance. Suitable for use where slip resistance is required. Expect a long wearing finish when used in high-speed burnishing programs as well as in conventional maintenance programs.

The quick drying formula allows multiple coats to be applied in short periods of time. 1 liter does approximately  one coat of  30-60m².

 

Packaging

2lt, 5lt

Technical

1. Vision H-Gloss should be applied to a clean floor prepared by stripping or scrubbing off the old finish if required (when the layers are too thick or the finish has dulled completely). We recommend using  Vision Strip.

2. Using a clean finish mop or applicator, apply 3-4 coats of Vision H-Gloss in even, medium coats. Before recoating, allow each coat to dry (approximately 30 minutes). Increased gloss and durability can be achieved by additional coats.

3. Maintain finish by frequent dust mopping and wet cleaning with Vision Floor Cleaner.

 

 

Downloads